Lead-Based Alloys

Babbitt Metals
Featuring tin-base and lead-base babbitt to ASTM, SAE, government, Navy specifications; special and custom alloys.
View more
Jackson Wheeler
Featuring Tuftin, Tuftex, Guntex, 4X, Hammer Alloy, Rollite, Duratex and Chipper Alloy
View more
Jewelry Alloys
Featuring: Art Caster’s Brass, Beryllium Copper, Brittania, Electrolytic Copper, Everdur, Jeweler’s Manganese Bronze, Nickel-Silver, Pewters, Superdie Zinc Alloys, and White Bronze
View more
Lead Alloys
Featuring: 99.99% Lead in a variety of forms, Pb-Base Babbitt and casting alloys for jewelry and ornamental products, 6% Antimonial Lead, Linotype Alloys, and Pb-Base Solders
View more
Solders
Featuring: Body solders, Lead-base, Lead-free solders, Low melting solders, Miter-Al-braze (MAB), Tin-Antimony solders, Tin-base, Tin-Cadmium solders, Tin-Lead solders, Tin-Zinc solders
View more
White Metals
Featuring Aluminum, Lead, Pewter, Solders, Jewelry, Sculpture, Tin, Zinc Alloys in a variety of forms for many applications
View moreFeatured Products
-
Can be used for various soldering methods including Wave, Selective, and Hand. Known for best in class yields, this material outperforms all Sn/Cu based materials and delivers excellent performance across a wide range of Flux Technologies. SAC305 is used to stabilize the copper content in the wave solder bath depending on process conditions. Forms: - Regular Bar
- Shot
- Ingot
Belmont Product Code 7972 Nominal Composition: - Sn: 96.5%
- Ag: 3%
- Cu: 0.5%
Technical Info: - Solidus: 217 C (423 F)
- Liquidus: 220 C (428 F)
-
Easily cast White Brass Alloy with good fluidity and high detail. We offer this material in a variety of forms including Ingot, Cut Bars, Cubes and Shot. Forms: - Ingot
- 2" Cut Bar
- 1/2" Polished Cubes
- Shot
Belmont Product Code 45815 Nominal Composition: - Cu: 58%
- Mn: 20%
- Zn: 20%
- Al: 1%
- Pb: 1%
-
This is our Original, Lead Free, Zinc Based Alloy that works well in Spin Cast Vulcanized Silicone Molds for designs with thick cross sections or minimal detail. Contains Proprietary Grain Refiners for improved casting properties. Forms: - 4-20 lb. KZ Ingot
Belmont Product Code 892NS1 Nominal Composition: - 90-94% Zinc in a Proprietary Formula
Technical Info: - Elongation : 8%
- Liquidus Temperature: 734F
- Pouring Temperatire: 800 F - 875 F
- Density: .244 lbs / Cu. In.
- Tensile Strength: 54,000
- Compression Strength: 68,800 psi
- Brinell Hardness: 146
- Finishes: Mechanical, chemical, organic, and electro-deposited, plastic
-
This Solder has good corrosion resistance and tensile strength. With a melting range beginning at 390 Deg. F. it avoids causing damage to critical electronics as well preventing substrate deformation and segregation. It is used very often in spray wire form for capacitors and other electronic parts. Forms: - 1/16" Dia. Plus .000" Minus .004" on 5 Lb. Spools
- 2-5 Ingot
- Cast Flat Anodes
Belmont Product Code 7601DS1C Nominal Composition: - 60.5% Sn
- 39.5% Zn
-
This is a Bismuth based non-eutectic alloy commonly used as a low-melting solder and also to make custom shaped blocks. It is also used to make metal inlays in wood and also useful for repairing antiques as the low melting temperature of Wood's metal makes it unlikely this will harm the original piece. Forms: - 1/4" Dia. Solid Wire
- 1/8" Dia Solid Wire
Belmont Product Code 2502DS1C Nominal Composition: - 12.5% Sn
- 25% Pb
- 50% Bi
- 12.5% Cd
-
Lead Silver solders such as this have physical properties - tensile, creep, and shear strength - which are good to 350 Deg. F. Fatigue properties are also better than the non silver solder alloys. Forms: - .063 Dia. Solid Wire
- 5Lb. Spools
- Capping Bars
Belmont Product Code 5951DS1C Nominal Composition: - 60% Sn
- 40% Pb
- 5.5% Ag
-
Tin-Lead solders is the largest single group and the most widely used of the soldering alloys . Tin-Lead solders are compatible for use with all types of base metal cleaners, fluxes, and heating methods. 60/40 Tin Lead solder, almost the eutectic is particularly adaptable to delicate work or when soldering temperature may be critical. This particular item comes in 1/16" Diameter and can also be offered in other sizes as well. This is also a quick setting solder for fine electrical and tinsmith work. Forms: - 1/16" Dia. Solid Wire
Belmont Product Code 76001DSC Nominal Composition: - 60% Sn
- 40% Pb
-
Lead,Tin, Antimony Alloy. Low Melting fusible alloy. Excellent low-cost alloy. High-antimony lead alloy specially treated to increase ductility and fluidity. Useful where casting may be subject to bending. Forms: - 2-8 Ingot
Belmont Product Code 5877 Nominal Composition: - 86.925% Pb
- 10% Sb
- 3% Sn
- 0.0725% Te
-
Lead shot is available for different applications. Type BB Lead shot prepare for ammunition measure 0.18 inches in diameter. Lead is the most common material for shotgun. Forms: - 0.18" Dia
Belmont Product Code 5010 Nominal Composition: - 99.90% Pb
-
R-8-18 size 0.18" Diameter, but tend to vary in size. It is used for a variety of other purposes with dense material for weight/balance. Due to lead's high desity, it is used to attenuate radiation, especially X-rays. Lead shot may be enclosed in a bag and then placed around a point source for radiation protection or for radiation shielding. Forms: - 8-16 Mesh Shot
Belmont Product Code 5011 Nominal Composition: - 99.90 Pb
-
35% Tin Pewter, Lead, Tin Alloy easy meltable with relatively low melting temperature. Offers opportunity for cost savings where its relatively high weight is not a problem . Offers opportunity for cost savings where its relatively high weight is not a problem. Forms: - 5-8 Ingot
Belmont Product Code 5632 Nominal Composition: - 62% Pb
- 3% Sb
- 35% Sn
-
Linotype shot for hydrometals and bullet casting. It is good for varmit cast bullets. Linotype does not have a larger % of tin in it but it really has a larger percentage of antimony that makes for hard and brittle bullets. Forms: - 10-20 Mesh .078" x .033"
Belmont Product Code 58410 Nominal Composition: - 84.25% Pb
- 11.5% Sb
- 4.25% Sn
-
Lead base alloy for casting bullets and fishing jigs. Linotype will have a brinell hardness and good strength. Used to be used a lot in the printing industry. Forms: - 10-20 Mesh 0.078" x 0.033
- 12-30 Mesh .0661 in. - .032"
- 20-25 Lb. Pig
- 40 Lb. Pigs
- Approx. 40 Lb. Pigs
Belmont Product Code 5841 Nominal Composition: - 84% Pb
- 12% Sb
- 4% Sn
-
-
A Proprietary Lead Base Babbitt with high compression, strength, and excellent heat transfer. Belmont Product Code B3 Nominal Composition: - Proprietary
-
A Proprietary Lead Base in the manufacture of wood chipper knives. Belmont Product Code C3 Nominal Composition: - Proprietary
-
A Proprietary Tin Base Alloy used for high speed high load applications. Belmont Product Code D3 Nominal Composition: - Proprietary
-
A Proprietary Lead Base Alloy with a small addition of Nickel for additional hardness. Belmont Product Code J1 Nominal Composition: - Proprietary
-
A Prorietary Lead Base Babbitt for low speed applications. Belmont Product Code L2 Nominal Composition: - Proprietary
-
A Proprietary Lead Base Babbitt often used in the relining of bearings in elevators. Belmont Product Code P1 Nominal Composition: - Proprietary
-
A Proprietary Tin Base Babbitt Alloy with Nickel additions for added strength. Belmont Product Code E5 Nominal Composition: - Proprietary
-
A Proprietary Tin Base Babbitt similar to ASTM B23 Grade 2 Babbitt with additions for added strength. Belmont Product Code F10 Nominal Composition: - Proprietary
-
A Proprietary Tin Base Lead Free Alloy with high tensile strength for heavy load applications. Belmont Product Code NV8 Nominal Composition: - Proprietary
-
A Proprietary Tin Base Alloy for medium load application. Belmont Product Code W1 Nominal Composition: - Proprietary
-
-
-
Nickel is known to improve corrosion resistance particularly in sea water. This makes it a good choice to improve the properties of marine alloys. Forms: - 2-14 Mesh Polished Shot
Belmont Product Code 45027 Nominal Composition: - 50% Cu
- 50% Ni
-
Master Alloy used in the production of Copper Alloys for a wide variety of industries. The introduction of Boron to Copper Alloys helps eliminate gas and porosity without the loss of conductivity. Forms: - 1/2" and Down Polished Shot
Belmont Product Code 49817 Nominal Composition: - 98% Cu
- 2% B