35% Tin Pewter, Lead, Tin Alloy easy meltable with relatively low melting temperature. Offers opportunity for cost savings where its relatively high weight is not a problem . Offers opportunity for cost savings where its relatively high weight is not a problem.

Forms:
  • 5-8 Ingot
Belmont Product Code5632
Nominal Composition:
  • 62% Pb
  • 3% Sb
  • 35% Sn

Related products

  • This Lead Free Pewter Alloy is high in Copper to allow it to work well in Open Face, Gravity Pour, Sand and Cast Iron Molds with maximum detail. Has good strength.
    Forms:
    • 4-5 Ingot
    • 1/4" and Down shot
    Belmont Product Code791NB7
    Nominal Composition:
    • Tin: 91-93% with Antimony and Copper.
    Technical Info:
    • Elongation (2" Section) : 40%
    • Liquidus Temperature: 563F
    • Solidus Temperature: 471F
    • Casting Temperature: 515F
    • Brinell: 23.8
    • Tensile Strength: 8600 psi
    • Solderability: Can be soldered Easily with soft solder
    • Finishes: Mechanical, chemical, organic, and electroplated
  • This is a high purity Tin based Lead Free Pewter Alloy, that meets or exceeds most Lead Free requirements. We certify it to be less than 50 ppm Lead Content. It works well in Spin Cast Rubber or Silicone Molds for designs with thick cross sections or a smooth, polished finish and some malleability.

    Forms:
    • 4-5 Ingot
    Belmont Product Code798NENTB
    Nominal Composition:
    • Sn: 97-99% with Bismuth and Silver in a Proprietary formula
    Technical Info:
    • Elongation (2" Section) : 20% - 40%
    • Liquidus Temperature: 465F - 485F
    • Solidus Temperature: 515F - 635F
    • Density: .23 - .275 lb. / Cu. In. @ 68F
    • Brinell: 18 - 25
    • Tensile Strength: 5,000 psi - 8700 psi
    • Solderability: Can be soldered Easily with soft solder and flux
    • Finishes: Mechanical, chemical, organic, and electroplated
  • This is a Lead Free Pewter, also referred to as a Britannia Alloy that works well in Spin Cast Molds for designs, such as Fashion (Costume) Jewelry, with thin cross sections or fine filigree and maximum detail requiring less malleability and more strength.

    Forms:
    • 4-5 Ingot
    Belmont Product Code791NR8
    Nominal Composition:
    • Sn: 91-93% with Antimony and Copper in a Proprietary formula enhanced from our standard 7921 Brittania
    Technical Info:
    • Elongation (2" Section) : 30% - 40%
    • Liquidus Temperature: 478F - 490F
    • Solidus Temperature: 435F - 463F
    • Brinell: 21 - 25
    • Tensile Strength: 7,000 psi - 9600 psi
    • Solderability: Can be soldered Easily with soft solder and flux
    • Finishes: Mechanical, chemical, organic, and electroplated

RELATED POSTS

Shot and Cubed Alloys: Advantages of Using Different Shaped Metals

Due to advanced manufacturing processes, companies today can use a range of base metals and alloys to create the right products and components to their industries. When obtaining the metals that will be used in casting, extruding and forming processes, manufacturers can request the alloys and base metals in various sizes and shapes. Ingots, cubes,…

Lead Wool Applications: Used in Medical O2 Sensors For Ventilators and Respirators

Lead wool is well known in the industrial sector. This material is often used to seal around flanges, connections, and pipes. It can also be found in apertures within walls and ceilings when there may be an abundance of radiation from equipment as the lead wool protects certain areas. Another industry where lead wool is…

The Use of White Bronze VS Pewter for Art Casting Applications

When it comes to casting applications, do you know which is better, white bronze or pewter? The most popular choice today and in the past has been pewter, but the use of white bronze has increased in recent years. Here at Belmont Metals, we have both white bronze and pewter that’s perfect for all your…

The Difference Silicon Bronze and Silicon Brass for Art Casting Applications

Craftspeople have been casting with bronze for so long that the BBC called it the “first alloy.” Introduced around 3,500 BC and typically made with mostly copper and tin, items made with bronze offered a more durable alternative to coper alone. Artifacts from brass have been dated to 500 BC. Brass may have been favored…

Selecting the Appropriate Babbitt Alloy

Babbitt metals are either lead or tin based, and the metal makes excellent bearings that are easy to pour as a DIY project. However, before you pour your bearings, you must select the correct babbitt metal in order to ensure your engine or piece of machinery operates correctly and efficiently. If you know the composition…

Antimony: Possessing Durability and Versatility When Alloyed with Other Metals

Semiconductors, machine bearings, and utensils are all made from varying amounts of metal alloys. Yet these items also possess one common factor: antimony. Antimony is a semi-metal element that comes in both a powdered form as well as a hard and brittle metal. Possessing a silvery, blush white appearance, this element is highly desired when…

The Versatility of Pewter: Alloy Types for Decorative Applications

When it comes to decorative alloys, pewter has made a comeback in recent years in the jewelry and crafting industries. This versatile alloy can be found throughout the jewelry world as plated rings, necklaces and bracelets. It is also fashioned into medals, pendants, figurines, statues, and replica coins. Many people may not actually know that…

Art Casting with Bronze and Brass

Creating art using the casting process dates back thousands of years as the oldest surviving piece of cast art dates back to 3200 BC. Yet artists today still enjoy creating a range of decorations, statues, figurines, jewelry and other artistic pieces using this process. The procedure involves using molten metals that are poured into a…

Brass and Bronze for Casting Alloys in Decorative Applications

When talking about brass and bronze, we most often think about these alloys in industrial settings, such as bronze industrial bushings and bearings, or brass valves and plumbing fixtures. Yet walk into a museum and will be surrounded by sculptures made out of bronze, or attend a classical opera and you will see brass instruments….

Nickel in Alloys For Jewelry Makers: Looking for Safer Alternatives

No matter the latest fashion trends hitting the New York and Paris runways, every model will have one thing in common: the jewelry they wear. Jewelry manufacturing is a booming business as adults and children of all ages are looking for the right jewelry to wear for everyday activities, special occasions and to have as…

Keep on rolling

Babbitt metals ensure machinery runs smoothly Bearings play an integral role in machine efficiency by reducing friction between moving parts. The earliest recorded examples of bearing usage date back to the Romans, and in the year 1500, Leonardo da Vinci sketched a design for a helicopter that incorporated ball bearings. Today, common types of bearings…

Safe sparklers

Using lead-free pewter alloys for making jewelry helps alleviate health concerns Adding lead to an alloy can help create characteristics—such as softness and lower melting temperatures—that are useful for many applications. However, lead also is a neurotoxin that is dangerous to animals and humans. Small children are more vulnerable to the effects of lead exposure…