Showing all 9 results
Featured products
-
Our standard Grade A Tin is sourced from highest quality supplier and is certified conflict free. We offer this material in a wide variety of forms so we can tailor the metal for your needs. Forms: - Granular
- Pigs
- Approx. 1 Lb. Regular Bars
- Sheet
- Cast Flat Anodes
- 1/4# Capping Bar
- Wire
- 2-5 Ingot
- 8-20 Mesh Shot
- Slabs
Belmont Product Code 7001 Nominal Composition: - 99.85 Sn
- Bal
-
We offer Ultra Pure Tin that is used for specific applications where higher grades are required. Our grade is refined to the highest standards. Ultra Pure Tin has extremely low levels of lead, cadmium, antimony, and copper. And we offer this material in a variety of forms that we can tailor to your application. Forms: - 8-20 Mesh Shot
- Approx. 1 Lb. Bars
- Approx. 53 Lb. Pigs
- Approx. 5 Lb. Ingots
Belmont Product Code 7004 Nominal Composition: - 99.99% Sn
- Bal
-
This is a high purity Tin based Lead Free Pewter Alloy, that meets or exceeds most Lead Free requirements. We certify it to be less than 50 ppm Lead Content. It works well in Spin Cast Rubber or Silicone Molds for designs with thick cross sections or a smooth, polished finish and some malleability. Forms: - 4-5 Ingot
Belmont Product Code 798NENTB Nominal Composition: - Sn: 97-99% with Bismuth and Silver in a Proprietary formula
Technical Info: - Elongation (2" Section) : 20% - 40%
- Liquidus Temperature: 465F - 485F
- Solidus Temperature: 515F - 635F
- Density: .23 - .275 lb. / Cu. In. @ 68F
- Brinell: 18 - 25
- Tensile Strength: 5,000 psi - 8700 psi
- Solderability: Can be soldered Easily with soft solder and flux
- Finishes: Mechanical, chemical, organic, and electroplated
-
This is a Lead Free Pewter, also referred to as a Britannia Alloy that works well in Spin Cast Molds for designs, such as Fashion (Costume) Jewelry, with thin cross sections or fine filigree and maximum detail requiring less malleability and more strength. Forms: - 4-5 Ingot
Belmont Product Code 791NR8 Nominal Composition: - Sn: 91-93% with Antimony and Copper in a Proprietary formula enhanced from our standard 7921 Brittania
Technical Info: - Elongation (2" Section) : 30% - 40%
- Liquidus Temperature: 478F - 490F
- Solidus Temperature: 435F - 463F
- Brinell: 21 - 25
- Tensile Strength: 7,000 psi - 9600 psi
- Solderability: Can be soldered Easily with soft solder and flux
- Finishes: Mechanical, chemical, organic, and electroplated
-
For high speed and heavy load applications slightly softer than Grade 1. Forms: - 5-6 Ingot
- 1/8", 1/16", 1/32", 3/16", 5/32" Dia Solid Wire
- Pigs
Belmont Product Code 7881 Nominal Composition: - 89% Sn
- 7.5% Sb
- 3.5% Cu
Technical Info: - ASTM B-23 Grade # : 2
- Melting Point-Solidus : 241 C, 466 F
- Melting Point - Liquidus : 354 C, 669 F
- Pouring Temperature : 425 C, 795 F
-
35% Tin Pewter, Lead, Tin Alloy easy meltable with relatively low melting temperature. Offers opportunity for cost savings where its relatively high weight is not a problem . Offers opportunity for cost savings where its relatively high weight is not a problem. Forms: - 5-8 Ingot
Belmont Product Code 5632 Nominal Composition: - 62% Pb
- 3% Sb
- 35% Sn
-
Phosphorus is used in tin as in tin solders to suppress dross formation keeping the metal bath cleaner. Forms: - Waffle
Belmont Product Code 7955 Nominal Composition: - 95% Sn
- 5% P
-
Belmont Special 92% Tin Pewter alloy is an excellent casting alloy with approximately 92% Tin (Tin base alloy). Special Pewter for figurines, models, etc. with heavy sections - better casting characteristics than lead free Britannia. Forms: - 5-6 Ingot
Belmont Product Code 7924 Nominal Composition: - 92% Sn
- 4% Pb
- 4% Sb
-
