Showing all 14 results
Featured products
-
A Copper (Cu) Alloy containing Chromium (Cr) used for their high strength and corrosion resistance. It offers high conductivity, good ductivity and strength. Serves as a master alloy to add chrome to various copper alloys. Forms: - 2-20 Ingot
Belmont Product Code 4989 Nominal Composition: - 98.7% Cu
- 1.3% Cr
Technical Info: - CDA #: 81500
- Melting Point (Liquidus): 1985 F, 1085 C
- Melting Point (Solidus): 1967 F, 1075 C
- Density: .319 lb./cu. in. @ 68 F
- Specific Gravity: 8.82
- Thermal Conductivity: 182 Btu./sq. ft./ft./hr/F @ 68 F
- Tensile Strength-ksi: 51
-
This alloy offers high strength, hardness, wear resistance with excellent fluidity. This alloy is ideal for investment, sand or ceramic casting and provides excellent replication of intricate detail. Forms: - 2-5 Ingot
- 2" Cut Bars
- 1" Cut Bar
- 1/2" Polished Cubes
- 1/2" x 14 Mesh Shot
Belmont Product Code 4977 Nominal Composition: - 97.2% Cu, 2.05% Be, 0.5% Co, 0.25% Si
-
Copper-Nickel 70/30 excellent resistance to corrosion and erosion. It's strong and dectile and is utilized in areas where high temperatures and pressures, combined with high velocities and turbulence are serious problems. Forms: - 2-20 Ingot
Belmont Product Code 47025 Nominal Composition: - 66% Cu
- 30.9% Ni
- 0.4% Si
- 1% Mn
- 0.7% Fe
- 1% Cb
Technical Info: - CDA #: 96400
-
This material offers the highest strength and hardness of all the BeCu alloys with excellent wear resistance and fluidity. Also offers extremely fine detail pick-up in ceramic or pressure cast processes. This also has the lowest pouring temperature of the BeCu alloys allowing almost any type of molding process to be used. Forms: - 1/2" and Down Polished Shot
- 1/2" X 14 Mesh Unpolished Shot
- 2-5 Ingot
Belmont Product Code 4971 Nominal Composition: - 96.43% Cu
- 2.7% Be
- 0.5% Co
- 0.3% Si
- 0.07% Ti
-
Copper-Nickel 90/10 has a very good resistance to uniform and local corrosion in seawater and, as opposed to other copper alloys, is not as susceptible to stress corrosion cracking. Forms: - 2-20 Ingot
Belmont Product Code 49019 Nominal Composition: - 86.85% Cu
- 10% Ni
- 1% Mn
- 1.4% Fe
- 0.75% Cb
Technical Info: - CDA #: 96200
-
Aluminum Bronze 415A Alloy CDA# 952 "Chemistry ONLY". Aluminum bronze bearings are used in heavy loaded applications. Forms: - 2-20 Ingot
Belmont Product Code 4872 Nominal Composition: - 87.5% Cu
- 9% Al
- 3.5% Fe
Technical Info: - CDA #: 95200
-
Leaded red brass is typically found in plumbing applications. It is known for its reasonable cost with good machining and casting properties. The lead content ensures pressure tightness. Red brass is also used for low-cost bearing materials under low loads. Forms: - 1" x 6" x 12" Slabs
- 2-20 Ingot
- 2" Sheared Pcs.
Belmont Product Code 4852 Nominal Composition: - 85% Cu
- 5% Zn
- 5% Sn
- 5% Pb
Technical Info: - CDA #: 83600
-
Manganeze bronze is a high strength and a hard alloy containing manganese and zinc. It's used for highly stressed machine parts. Forms: - 1/2" Polished Cubes
- 2-20 Ingot
Belmont Product Code 4643 Nominal Composition: - 65% Cu
- 25% Zn
- 3% Mn
- 4% Al
- 3% Fe
Technical Info: - CDA #: 86200
-
Navy M Leaded Bronze C92200 Bronze is an alloy of copper, further classified as a bronze (copper-tin- alloy). Is used for a variety of steam pressure applications involving temperatures up to 550 F. Forms: - 1-20 Ingot
Belmont Product Code 4884 Nominal Composition: - 88% Cu
- 4% Zn
- 8% Sn
Technical Info: - CDA #: 90300
-
Navy M Leaded Bronze C92200 Bronze is an alloy of copper, further classified as a bronze (copper-tin- alloy). Is used for a variety of steam pressure applications involving temperatures up to 550 F. Forms: - 20 Lb. Ingots
Belmont Product Code 4888 Nominal Composition: - 88% Cu
- 4.5% Zn
- 6% Sn
- 1.5% Cr
Technical Info: - CDA #: 92200
-
Forms: - 2-20 Ingot
Belmont Product Code 4562 Nominal Composition: - 57% Cu
- 20% Zn
- 12% Ni
- 2% Sn
- 9% Pb
Technical Info: - CDA #: 97300