Showing all 20 results
Featured products
-
Bismuth is a white, brittle metal with a slight pink color and is typically recovered as a by-product of lead and copper. It is commonly used as an alloying element for various low melting alloys where it is mixed with other metals such as Lead, Tin, or Cadmium. It is also used as well for a lead substitute in other materials. The Ingots are our largest size available and have a purity of 99.99% and often serve as grain refiner in the foundry industry as well. Our regular bars can be used in solder applications as a replacement for Lead since it is non-toxic. Our 1/8" & down shot product allows you to make smaller additions during your casting process and has a purity of 99.9%. Forms: - Slabs
- #6 Small Shot Approx. 1/8" and Down
- Regular Bar 1/2" X 7/8" X 13"
Belmont Product Code 2001 Nominal Composition: - 99.99% Bi
-
Lithium has the advantage of being able to combine with both oxygen and hydrogen. Used on its own, Lithium will be more of a deoxidizer. Used in a “duplex treatment”, deoxidizing first, then Lithium can be considered a degasifier now available to be a scavenger for hydrogen and other unwanted gasses. Forms: - 1 Lb. Pcs. 1" X 1" x 4"
- 3-4 Oz. Polished Pieces
- 1" x 6" x 12" Slabs
Belmont Product Code 4981 Nominal Composition: - 98% Cu
- 2% Li
-
Our standard Grade A Tin is sourced from highest quality supplier and is certified conflict free. We offer this material in a wide variety of forms so we can tailor the metal for your needs. Forms: - Granular
- Pigs
- Approx. 1 Lb. Regular Bars
- Sheet
- Cast Flat Anodes
- 1/4# Capping Bar
- Wire
- 2-5 Ingot
- 8-20 Mesh Shot
- Slabs
Belmont Product Code 7001 Nominal Composition: - 99.85 Sn
- Bal
-
Excellent general use Bronze for most any Jewelry Applications. This alloy offers very high detail, easy castability, and accepts patinas very well. This alloy has a very warm bronze color. Forms: - 2-20 Ingot
- 2-5 Ingot
- 1/2" & Down Polished Shot
- 1/2" & Down Cubes
- 2" Polished Cut Bar
- Slabs
- Unpolished Shot 1/2" x 14 Mesh
Belmont Product Code 4951 Nominal Composition: - 95% Cu
- 4% Si
- 1% Mn
Technical Info: - CDA #: 87300
- Melting Range: 1550 F - 1780 F, 840 C - 971 C
- Pouring Range: 1900 F - 2250 F, 1010 C - 1235 C
- Density: 0.302 lbs/cu. in, 8.36 g/cu. cm
- Tensile Strength: 55000 lbs/sq. in.
- Yield Strength: 25000 lbs/sq in.
- Brinell Hardness: 85
-
This is a proprietary alloy especially developed for Jewelry casting. This alloy has a warm yellow color. Forms: - 1/2" Polished Cubes
- 1/2" x 14 Mesh Unpolished Shot
- 1" Cut Bar
- 2" Cut Bars
- 2-20 Ingot
- 2-5 Ingot
- Slabs
Belmont Product Code 46316 Nominal Composition: - Proprietary
Technical Info: - Melting Range: 1625 - 1650 F
- Pouring Range: 1700 - 1900 F
- Density: 0.30 lbs per cubic inch
- Specific Gravity: 8.4
- Pattern Makers Shrinkage: 3/16" per foot
- Machinability vs. free cutting brass: 80%
-
This alloy offers a white color that is similar to White Gold Alloys and Stainless Steel Alloys. Often used for larger pieces such as belt buckles and larger jewelry pieces. Forms: - 1/2" Polished Cubes
- 1/2" x 14 Mesh Unpolished Shot
- 2" Cut Bars
- 2-20 Ingot
- 2-5 Ingot
- Slabs
Belmont Product Code 4587 Nominal Composition: - Proprietary
-
Mainly used in galvanizing steel to prevent rusting, in zinc die casting alloys and in copper based alloys, such as brass. Zinc is also essential to the growth of many kinds of organisms, both plant and animal. Zinc also extends the life of other material such as steel (by hot dipping or electrogalvanizing), rubber and plastics (as an aging inhibitor) and wood (in paints) Forms: - 2-14 Mesh Shot
- 50 lb Slabs
Belmont Product Code 8000 Nominal Composition: - 99.99% Zn
-
-
Zirconium acts as a grain refiner in Copper Alloys and can improve mechanical properties. Forms: - Broken Slabs
Belmont Product Code 49011 Nominal Composition: - 90% Cu
- 10% Zr
-
-
Zirconium acts as a grain refiner in Copper Alloys and can improve mechanical properties. Forms: - 1" x 6" x 12" Broken Slabs
Belmont Product Code 45046 Nominal Composition: - 50% Cu
- 50% Zr
-
Magnesium is a strong deoxidizer particularly for nickel alloys. As a Copper master alloy it is effective and less reactive. If alloyed, in can improve mechanical properties. Forms: - Broken Slabs
Belmont Product Code 4800 Nominal Composition: - 80% Cu
- 20% Mg
-
-
-
Lithium added to Alloys containing Magnesium help prevent dross formation. Forms: - 1" x 6" X 12" Slabs
- 2-2 Ingot
Belmont Product Code 19515 Nominal Composition: - 95% Al
- 5% Li
-
Chromium will improve strength without adversely affecting ductility. Forms: - 1" x 6" x 12" Slabs
Belmont Product Code 18012 Nominal Composition: - 80% Al
- 20% Cr
-
-
A Beryllium containing copper base master alloy which is used to introduce Beryllium into new melts or to replace Beryllium lost through oxidation in remelts. Forms: - Approx. 1" Pcs.
- 1/2" and Down Shot
- Slabs
Belmont Product Code 4962 Nominal Composition: - 96% Cu
- 4% Be
-
Silicon brass a copper/zinc alloy with some tin and / or lead tossed in to improve hardness, color and machining qualities. This alloy is especially desirable for fluid moving applications. Forms: - 1/2" Polished Cubes
- 1/2" x 14 Mesh Polished Shot
- 2" Cut Polished Pcs.
- 2-20 Ingot
- 2-5 Ingot
- Slabs
Belmont Product Code 4811 Nominal Composition: - 82.5% Cu
- 4% Si
- 13.5% Zn
Technical Info: - CDA #: 87500
-
Leaded red brass is typically found in plumbing applications. It is known for its reasonable cost with good machining and casting properties. The lead content ensures pressure tightness. Red brass is also used for low-cost bearing materials under low loads. Forms: - 1" x 6" x 12" Slabs
- 2-20 Ingot
- 2" Sheared Pcs.
Belmont Product Code 4852 Nominal Composition: - 85% Cu
- 5% Zn
- 5% Sn
- 5% Pb
Technical Info: - CDA #: 83600