Showing all 10 results
Featured products
-
Lead has been commonly used for thousands of years because it is widespread, easy to extract and easy to work with since it is highly malleable as well as easy to smelt. Lead is used in lead-acid batteries, bullet and shot, weights, and Bricks for Radiation Protection. Forms: - Ingot
- 0.08", 0.09", 0.11", 0.15" Shot
- Pigs
- Capping Bar
- 1 lb Bar
- Powder
- Sheet
- Wool
Belmont Product Code 5002 Nominal Composition: - 99.9% Pb
- Bal
-
This is a Lead Base Babbitt used for low speed applications. Forms: - 5-8 Ingot
Belmont Product Code 5807 Nominal Composition: - 79.55% Pb
- 15% Sb
- 5% Sn
- 0.45% As
Technical Info: - ASTM B-23 Grade #: 8
- Melting Point-Solidus: 237 C, 459 F
- Melting Point - Liquidus: 272 C, 522 F
- Pouring Temperature: 340 C, 645 F
-
-
35% Tin Pewter, Lead, Tin Alloy easy meltable with relatively low melting temperature. Offers opportunity for cost savings where its relatively high weight is not a problem . Offers opportunity for cost savings where its relatively high weight is not a problem. Forms: - 5-8 Ingot
Belmont Product Code 5632 Nominal Composition: - 62% Pb
- 3% Sb
- 35% Sn
-
Linotype shot for hydrometals and bullet casting. It is good for varmit cast bullets. Linotype does not have a larger % of tin in it but it really has a larger percentage of antimony that makes for hard and brittle bullets. Forms: - 10-20 Mesh .078" x .033"
Belmont Product Code 58410 Nominal Composition: - 84.25% Pb
- 11.5% Sb
- 4.25% Sn
-
Lead - Antimony alloys have high corrosion resistance in most enviroments. They form a protective, impermeable film even faster than pure lead and in some cases even faster than chemical lead. It is found that except in the presence of florine compunds, 6% antimonial lead is more resistant to corrosion than is soft lead. 6% Antimony, 92% Lead this is by far the most popular with target shooters. Good castability. Somewhat brittle. Moderate cost. Forms: - 2-8 Ingot
- Rods
- Sheet
Belmont Product Code 5933 Nominal Composition: - 93% Pb
- 6% Sb
- 1% Sn
-
Lead,Tin, Antimony Alloy. Low Melting fusible alloy. Excellent low-cost alloy. High-antimony lead alloy specially treated to increase ductility and fluidity. Useful where casting may be subject to bending. Forms: - 2-8 Ingot
Belmont Product Code 5877 Nominal Composition: - 86.925% Pb
- 10% Sb
- 3% Sn
- 0.0725% Te
-
Lead base alloy for casting bullets and fishing jigs. Linotype will have a brinell hardness and good strength. Used to be used a lot in the printing industry. Forms: - 10-20 Mesh 0.078" x 0.033
- 12-30 Mesh .0661 in. - .032"
- 20-25 Lb. Pig
- 40 Lb. Pigs
- Approx. 40 Lb. Pigs
Belmont Product Code 5841 Nominal Composition: - 84% Pb
- 12% Sb
- 4% Sn
-
R-8-18 size 0.18" Diameter, but tend to vary in size. It is used for a variety of other purposes with dense material for weight/balance. Due to lead's high desity, it is used to attenuate radiation, especially X-rays. Lead shot may be enclosed in a bag and then placed around a point source for radiation protection or for radiation shielding. Forms: - 8-16 Mesh Shot
Belmont Product Code 5011 Nominal Composition: - 99.90 Pb
-
Lead shot is available for different applications. Type BB Lead shot prepare for ammunition measure 0.18 inches in diameter. Lead is the most common material for shotgun. Forms: - 0.18" Dia
Belmont Product Code 5010 Nominal Composition: - 99.90% Pb