Showing all 12 results
Featured products
-
Slush Cast alloy is a high purpose-engineered product. This alloy was developed to provide a high fluidity casting material capable of producing a good surface definition when cast in metal permanent molds or rubber molds. It contains approximately 5% Aluminum and 95% Zinc. It is used primarily for the use of hollow castings. Forms: - 4-20 Ingot
Belmont Product Code 8952 Nominal Composition: - 95% Zn
- 5% Al
-
Zinc/Aluminum solder 99% Zinc and 1% Aluminum. Used by the Romans and is commonly used today, particularly in musical instruments and many hardware applications that must resist corrosion. Zinc is an alloy with Lead and Tin to make solder, a metal with a relatively low melting point used to join electrical components, pipes and other applications. Forms: - 4-20 Ingot
Belmont Product Code 8995 Nominal Composition: - 99% Zn
- 1% Al
-
This is our Original, Lead Free, Zinc Based Alloy that works well in Spin Cast Vulcanized Silicone Molds for designs with thick cross sections or minimal detail. Contains Proprietary Grain Refiners for improved casting properties. Forms: - 4-20 lb. KZ Ingot
Belmont Product Code 892NS1 Nominal Composition: - 90-94% Zinc in a Proprietary Formula
Technical Info: - Elongation : 8%
- Liquidus Temperature: 734F
- Pouring Temperatire: 800 F - 875 F
- Density: .244 lbs / Cu. In.
- Tensile Strength: 54,000
- Compression Strength: 68,800 psi
- Brinell Hardness: 146
- Finishes: Mechanical, chemical, organic, and electro-deposited, plastic
-
Commercial Zinc base alloy, it contains approximately 15% Aluminum and 85% Zinc. Specially formulated and metallurgically designed to provide superior casting results in Spin-Casting applications. Forms: - 4-16 Ingot
Belmont Product Code 8853 Nominal Composition: - 85% Zn
- 15% Al
-
Zamak 12 offers high hardness and high tensille strenght. This is the preferred alloy for permanent mold applications although it can also be cold-chamber die-cast with excellent results. It combines low temperature melting efficiency and thin wall capabilities with premium mechanical properties. ZA-12 can usually be poured directly into molds designed for aluminum and brass. Forms: - 4-20 Ingot
Belmont Product Code 8871 Nominal Composition: - 88% Zn
- 11% Al
- 1% Cu
-
Zamak 3 is a family of alloys with a base metal of zinc and alloying elements of aluminum, magnesium and copper. It is the most commonly used in Zinc die casting, providing an excellent combination of strenght, ductility. It also provides excellent plating and finishing characteristics. This alloy is the designers first choice for die casting applications and the most widely used in North America. Forms: - 4-20 Lb. Ingot
Belmont Product Code 8961 Nominal Composition: - 96% Zn
- 4% Al
-
Zamak 7 is a modification of Zamak 3. However, Zamak 7 has higher ductility (for Forming and bending operations) and the highest casting fluidity of the Zamak family. Excibits excellent damping capacity and vibration attenuation in comparison with aluminum die casting alloys. Forms: - 4-20 Ingot
Belmont Product Code 8962 Nominal Composition: - 95.87% Zn
- 4.1% Al
- 0.015% Mg
- 0.015% Ni