Showing all 12 results

Featured products

  •  
     
    2% Lithium Copper
    2% Lithium Copper
    Lithium has the advantage of being able to combine with both oxygen and hydrogen. Used on its own, Lithium will be more of a deoxidizer. Used in a “duplex treatment”, deoxidizing first, then Lithium can be considered a degasifier now available to be a scavenger for hydrogen and other unwanted gasses.
    Forms:
    • 1 Lb. Pcs. 1" X 1" x 4"
    • 3-4 Oz. Polished Pieces
    • 1" x 6" x 12" Slabs
    Belmont Product Code 4981
    Nominal Composition:
    • 98% Cu
    • 2% Li
  •  
     
    2% Boron Copper
    2% Boron Copper
    Can be considered either a deoxidizer or grain refiner. Generally, for pure copper its role would be deoxidizing but in brasses it’s more of a grain refiner.
    Forms:
    • 3/4" & Down Polished Shot
    • 3/4" & Down Unpolished Shot
    • 40-15 Waffle
    • 4-5 Oz Pcs.
    Belmont Product Code 4987
    Nominal Composition:
    • 98% Cu
    • 2% B
  •  
     
    Belmont Special 2% Boron Copper
    Belmont Special 2% Boron Copper
    Master Alloy used in the production of Copper Alloys for a wide variety of industries. The introduction of Boron to Copper Alloys helps eliminate gas and porosity without the loss of conductivity.
    Forms:
    • 1/2" and Down Polished Shot
    Belmont Product Code 49817
    Nominal Composition:
    • 98% Cu
    • 2% B
  •  
     
    #26 Aluminum Bronze Degasifier
    #26 Aluminum Bronze Degasifier
    Compound Degasifier engineered to be effective at removing unwanted gases when used with Aluminum Bronze family of Alloys.
    Forms:
    • 40-15 Waffle
    • Broken Waffle
    Belmont Product Code 46314
    Nominal Composition:
    • Proprietary
  •  
     
    15% Phosphor Copper
    15% Phosphor Copper
    Phos Copper is the most commonly used deoxidizer. Effectively removes oxygen from molten metal with little or no reaction or dross formation.
    Forms:
    • 3 Mesh Shot
    • Approx. 15 Lb. Waffle Ingots
    Belmont Product Code 48514
    Nominal Composition:
    • 85% Cu
    • 15% P
  •  
     
    Virgin Grade 10% Silicon Copper
    Virgin Grade 10% Silicon Copper
    Silicon increases fluidity in brasses and copper nickel alloys. Silicon copper can become a deoxidizer if phosphorous cannot be used.
    Forms:
    • 1/2" - 1/" Lumps
    • Slabs
    Belmont Product Code 49015
    Nominal Composition:
    • 90% Cu
    • 10% Si
  •  
     
    Virgin Grade 15% Silicon Copper
    Virgin Grade 15% Silicon Copper
    Forms:
    • 1/2" - 1/8" Lumps
    Belmont Product Code 48518
    Nominal Composition:
    • 85% Cu
    • 15% Si
  •  
     
    #15 Nickel Degasifier
    #15 Nickel Degasifier
    Compound Degasifier engineered to be effective at removing unwanted gases when used with Nickel Alloys.
    Forms:
    • 2" and Down
    Belmont Product Code 48515
    Nominal Composition:
    • Proprietary
  •  
     
    10% Zirconium Copper
    10% Zirconium Copper
    Zirconium acts as a grain refiner in Copper Alloys and can improve mechanical properties.
    Forms:
    • Broken Slabs
    Belmont Product Code 49011
    Nominal Composition:
    • 90% Cu
    • 10% Zr
  •  
     
    67/33 Copper Zirconium
    67/33 Copper Zirconium
    Zirconium acts as a grain refiner in Copper Alloys and can improve mechanical properties.
    Forms:
    • 1" x 6" x 12" Broken Slabs
    • 5 Gram & Down Pieces
    Belmont Product Code 46710
    Nominal Composition:
    • 67% Cu
    • 33% Zr
  •  
     
    50% Zirconium Copper
    50% Zirconium Copper
    Zirconium acts as a grain refiner in Copper Alloys and can improve mechanical properties.
    Forms:
    • 1" x 6" x 12" Broken Slabs
    Belmont Product Code 45046
    Nominal Composition:
    • 50% Cu
    • 50% Zr
  •  
     
    5% Phosphor Tin Alloy
    5% Phosphor Tin Alloy
    Phosphorus is used in tin as in tin solders to suppress dross formation keeping the metal bath cleaner.
    Forms:
    • Waffle
    Belmont Product Code 7955
    Nominal Composition:
    • 95% Sn
    • 5% P