Showing all 11 results
Featured products
-
Silicon ranks second to Copper in the importance in Aluminum Casting Alloys. Silicon reduces the melting temperature without causing brittleness, increases fluidity, and reduces hot tearing. This improves overall casting characteristics allowing for thinner and more intricate castings to be made. Silicon additions can reduce the amount casting shrinkage and in general Aluminum-Silicon Alloys have been resistance to corrosion. Forms: - 16-17 Waffle
- 30-60 Mesh Granular
Belmont Product Code 1503 Nominal Composition: - 50% Al
- 50% Si
-
-
-
Lithium added to Alloys containing Magnesium help prevent dross formation. Forms: - 1" x 6" X 12" Slabs
- 2-2 Ingot
Belmont Product Code 19515 Nominal Composition: - 95% Al
- 5% Li
-
Chromium will improve strength without adversely affecting ductility. Forms: - 1" x 6" x 12" Slabs
Belmont Product Code 18012 Nominal Composition: - 80% Al
- 20% Cr
-
-
Titanium is a grain refiner for Aluminum and improves mechanical properties. Forms: - 1" x 1" x 3" Sheared Pieces
Belmont Product Code 19512 Nominal Composition: - 94% Al
- 6% Ti
-
-
The presence of Iron in Aluminum aides in the decrease of hot tears, improves tensile, yield, and hardness and preserves strength at elevated temperature. Forms: - 16-20 Waffle
Belmont Product Code 19013 Nominal Composition: - 90% Al
- 10% Fe
-
-
Manganese added to Aluminum increases strength and hardness. It's beneficial in regards to corrosion resistance. Manganese is a grain refiner foir Aluminum. When Manganese is balanced with Iron it can change Iron rich needles to plates increasing ductility. Forms: - 5" x 1/2" Broken Slab
Belmont Product Code 1402 Nominal Composition: - 40% Al
- 60% Mn