Showing all 14 results
Featured products
-
The 200-Series of Aluminum-Copper Alloys are well known for very high strength; nearly double that of the more common 300-Series of Aluminum-Silicon alloys. However, the 200 series can be very difficult to cast. These alloys should be considered where the strength vs. weight ratio is the key consideration such as in the Aerospace and Transportation sector. Forms: - Ingot
- Sheared Pieces
- 16-17 Waffle
Belmont Product Code 19413 Nominal Composition: - 94% Al
- 4.5% Cu
- 0.7% Ag
- Bal
-
A356 has very good casting and machining characteristics. Corrosion resistance is excellent and it has very good weldability characteristics. Mechanical properties are rated excellent. Typically this alloy is used in castings for aircraft parts, pump housings, impellers, high velocity blowers and structural castings where high strength is required. The fact that A356 has good castability makes it a logical choice for intricate and complex castings where lightweight, pressure tightness and excellent mechanical properties are needed. Forms: - Ingot
- Saw Cut Pcs.
Belmont Product Code 10A356P Nominal Composition: - 92.6% Al
- 7% Si
- 0.4% Mg
-
Forms: - 3-16 Ingot
Belmont Product Code 18912 Nominal Composition: - 90% Al
- 2% Cu
- 0.8% Mg
- 1.2% Ni
- 6% Sn
-
319 has excellent casting and machining characteristics. Corrosion resistance and weldability are very good and the mechanical properties are good. The anodized color is generally gray with a brown cast depending on the amount and ratio of silicon and copper. Typical applications for sand casting 319.0 are a wide variety of structural castings for engine parts, gas and oil pans, and general commercial applications. Forms: - 22 Lb. Ingot
Belmont Product Code 10319 Nominal Composition: - 90.5% Al
- 3.5% Cu
- 6% Si
-
-
A380 offers the best combination of casting, mechanical, and thermal properties and exhibits excellent fluidity, pressure tightness, and resistance to hot cracking. It is used for a wide variety of products including chassis for electronic equipment, engine brackets, gearbox cases, household furniture, power, and hand tools. Forms: - 3-16 Ingot
Belmont Product Code 18810 Nominal Composition: - 88% Al
- 3.5% Cu
- 8.5% Si
-
-
A357 is typically used in situations where high strength combined with high corrosion resistance and/or pressure tightness are required. A357 is commonly used to make parts; including structural, machine, impellers, housings, pump and valve components, tools, frames, and brackets. Forms: - 30 lb Ingot
Belmont Product Code 19320 Nominal Composition: - 92.2%Al
- 7% Si
- 0.6% Mg
- Bal
-
The 200-Series of Aluminum-Copper Alloys are well known for very high strength; nearly double that of the more common 300-Series of Aluminum-Silicon alloys. However, the 200 series can be very difficult to cast. These alloys should be considered where the strength vs. weight ratio is the key consideration such as in the Aerospace and Transportation sector. Forms: - 3-16 Ingot
Belmont Product Code 19215 Nominal Composition: - 92.35% Al
- 5% Cu
- 1.5% Ni
- Bal
-
-
-
-
-
Forms: - Approx. 35 Lb. Ingots
Belmont Product Code 1920 Nominal Composition: - 92.22% Al
- 7% Si
- 0.6% Mg
- Bal