Showing all 8 results
Featured products
-
Tin-Lead solders is the largest single group and the most widely used of the soldering alloys . Tin-Lead solders are compatible for use with all types of base metal cleaners, fluxes, and heating methods. 60/40 Tin Lead solder, almost the eutectic is particularly adaptable to delicate work or when soldering temperature may be critical. This particular item is a soldering bar weighing approx. 1 Lb. with dimensions of approx. 3/4" wide x 1/4" thick x 14" long. Forms: - 1" Pcs.
- 1/8" & Down Shot
- Capping Bars
- Regular Bar
Belmont Product Code 76015 Nominal Composition: - 60% Sn
- 40% Pb
-
This Solder has good corrosion resistance and tensile strength. With a melting range beginning at 390 Deg. F. it avoids causing damage to critical electronics as well preventing substrate deformation and segregation. It is used very often in spray wire form for capacitors and other electronic parts. Forms: - 1/16" Dia. Plus .000" Minus .004" on 5 Lb. Spools
- 2-5 Ingot
- Cast Flat Anodes
Belmont Product Code 7601DS1C Nominal Composition: - 60.5% Sn
- 39.5% Zn
-
Solders such as this can be used to join copper and most copper alloys, lead, nickel alloys and steel. This general purpose solder has a wide melting range used for automotive, radiator, gutter repair and electrical applications. Can also be offer in various wire diameters as well. Forms: - Regular Bar
- Capping Bar
Belmont Product Code 75012 Nominal Composition: - 50% Sn
- 49.65% Pb
- Bal
-
Tin-Lead solders is the largest single group and the most widely used of the soldering alloys . Tin-Lead solders are compatible for use with all types of base metal cleaners, fluxes, and heating methods. 60/40 Tin Lead solder, almost the eutectic is particularly adaptable to delicate work or when soldering temperature may be critical. This particular item comes in 1/16" Diameter and can also be offered in other sizes as well. This is also a quick setting solder for fine electrical and tinsmith work. Forms: - 1/16" Dia. Solid Wire
Belmont Product Code 76001DSC Nominal Composition: - 60% Sn
- 40% Pb
-
This solder is primarily used for soldering Aluminum to Aluminum or Copper usually where lower soldering temperature than Zinc-Aluminum solders is required. It is used extensively in spray wire from for capacitors and other electronic parts and also has a high tensile strength. Forms: - 1/4" LB. Capping Bar
- 2-8 Ingot
- 2MM Dia. (.078" - .079") Wire
Belmont Product Code 7702 Nominal Composition: - 70% Sn
- 30% Zn
-
This is a Bismuth based Eutectic low melting alloy used for tooling and production aids. It provides you with easily castable material that is ready for use as soon as it freezes. This alloy can be recovered easily and recycled into new uses a number of times. It is mainly used in the optical industry for lens blocking when grinding glass, plastic lenses and optical components. It's low meeting point allows it not to distort the glass or plastic which it supports, Also can be used for proof casting as well. In comparison to its 117 Deg F. counterpart this alloy does not contain Cadmium. Forms: - 2 Lb. Cake Even Weight
- 1/8" Dia Solid Wire
- Capping Bars
Belmont Product Code 2491 Nominal Composition: - 49% Bi
- 18% Pb
- 21% In
- 12% Sn
Technical Info: - Melting Point - Solidus 136 F, 58 C
- Melting Point - Liquidus 136 F, 58 C
- Short-Term Tensile Strength lbs/sq.in. 6300
- Yield Temperature 136
- Weight lbs/cu.in 0.31
- Brinnell Hardness No. (500 kg) 14
- Growth/Shrinkage - Time after Casting: after 2 mi.: 0.0003
- after 1 hour: 0
- after 24 hrs: -0.0002
- after 500 hrs: -0.0002
-
This is a Bismuth based non-eutectic alloy commonly used as a low-melting solder and also to make custom shaped blocks. It is also used to make metal inlays in wood and also useful for repairing antiques as the low melting temperature of Wood's metal makes it unlikely this will harm the original piece. Forms: - 1/4" Dia. Solid Wire
- 1/8" Dia Solid Wire
Belmont Product Code 2502DS1C Nominal Composition: - 12.5% Sn
- 25% Pb
- 50% Bi
- 12.5% Cd
-
Lead Silver solders such as this have physical properties - tensile, creep, and shear strength - which are good to 350 Deg. F. Fatigue properties are also better than the non silver solder alloys. Forms: - .063 Dia. Solid Wire
- 5Lb. Spools
- Capping Bars
Belmont Product Code 5951DS1C Nominal Composition: - 60% Sn
- 40% Pb
- 5.5% Ag