95% Zn / 5% Al zinc-aluminum solder with superior corrosion resistance. Forms: capping bar; 4-20 ingot; and regular bars. Used for aluminum-to-aluminum and aluminum-to-zinc soldering.
Zinc-aluminum alloy (95% Zn, 5% Al) for high-fluidity hollow castings in permanent metal and rubber molds. 4-20 lb ingot.
Zinc-aluminum solder alloy (98% Zn, 2% Al) for thermal spray coating of steel and metal joining applications requiring zinc-base bond coat.
Zinc-aluminum solder alloy (99% Zn, 1% Al) for metal joining in musical instruments, hardware, and corrosion-resistant applications. 4-20 lb ingot.
Zinc-aluminum alloy (85% Zn, 15% Al) for spin casting. Superior casting results in metal and rubber molds with bright as-cast surface finish. 4-16 lb ingot.
Zinc-aluminum-copper alloy (88% Zn, 11% Al, 1% Cu) for permanent mold and cold-chamber die casting with high hardness, high tensile strength, and thin-wall capability.
Standard zinc die casting alloy (96% Zn, 4% Al) — the most widely used zinc die casting alloy in North America. Excellent strength, ductility, plating, and finishing characteristics. 4-20 lb ingot.
Zamak 5 zinc die casting alloy with 1% copper addition for increased strength and hardness over Zamak 3. Forms: capping bar, 4-20 ingot, regular bar, and Margash bar.
Modified Zamak zinc die casting alloy (95.87% Zn, 4.1% Al, 0.015% Mg, 0.015% Ni) with highest ductility and casting fluidity in the Zamak family. 4-20 lb ingot.
