MIL-A-18001L Class 1 Type ZDM zinc anode assembly with brass plug and replaceable zinc elements. Plug NPT sizes 3/8″ to 1″. Used for cathodic protection of marine vessels.
MIL-A-18001L Class 1 zinc pencil anodes with hex brass plugs. Plug sizes 1/4″ to 1″ NPT, rod lengths 1″ to 24″. Used to protect engine cooling passages, stern drives, and marine equipment from electrolytic corrosion.
MIL-DTL-18001L Type L26 oval zinc hull anode, 2-1/4″ x 4-1/2″ x 14″ with 1 steel strap. Used for cathodic protection of ship hulls and offshore steel structures.
MIL-DTL-18001L Type L48 oval zinc hull anode, 2-1/4″ x 4-1/2″ x 24″ with 1 steel strap. Used for cathodic protection of ship hulls where higher zinc mass per installation point is required.
MIL-DTL-18001L Type ZEP Style A zinc anodes, 6″ square and 12″ x 12″ x 1″ thick configurations. Used for cathodic protection of steel hull plates and underwater tanks.
MIL-DTL-18001L Type ZEP Style B round zinc anodes, 2″ to 11″ diameter, 1″ thick. Available with 3/8″ or 1/2″ IPS. Used for cathodic protection of steel hulls and tanks.
MIL-DTL-18001L Type ZEP Style C semi-circular zinc anode, 15″ diameter, with two 1.5″ IPS inserts. Used for cathodic protection of cylindrical hull structures and tanks.
MIL-DTL-18001L Type ZTS tear-drop zinc anode, 1-1/4″ x 3″ x 9″. Used for cathodic protection of ship hulls and marine structures requiring a streamlined, low-drag profile.
MIL-DTL-18001L Class 2 Type ZRN zinc rods with full mill certification. Three diameters in 72″ lengths. Used as pencil anode stock and for marine cathodic protection rod applications.
