Different Grades of Copper

Copper is used throughout industry for its outstanding electrical and thermal conductivity, corrosion resistance and workability. But “copper” covers several distinct grades, and the differences in purity, oxygen content and small additions decide how each one conducts, joins, machines and casts. At Belmont Metals, we help buyers and engineers choose between the different grades of copper every day. Here is a guide to the main grades and how to choose between them.

Quick Reference

  • Oxygen-free (C10100, C10200): highest purity and conductivity; no hydrogen embrittlement. Best for vacuum electronics, high-end conductors and hydrogen brazing.

  • Electrolytic tough pitch, ETP (C11000): the standard electrical grade; about 100% IACS. Best for wire, bus bar and general electrical use.

  • Phosphorus-deoxidized, DHP (C12200): lower conductivity but excellent for brazing and welding. Best for plumbing tube and heat exchangers.

  • Free-machining (C14500, C14700): small tellurium or sulfur additions for much better machinability.

Commercially Pure Coppers

Coppers designated C10100 through C13000 are at least 99.3% copper. They are soft and ductile, and the small differences between them, in oxygen, phosphorus or other elements, drive big differences in conductivity and how the metal behaves when heated, joined or machined.

Oxygen-Free Coppers (C10100 and C10200)

Oxygen-free copper is melted and cast under protective, non-oxidizing conditions, leaving virtually no oxygen in the metal. C10100 (oxygen-free electronic, or OFE) is at least 99.99% copper; C10200 is at least 99.95%. Because there is no oxygen to react with hydrogen, these grades do not suffer hydrogen embrittlement during brazing or annealing in hydrogen-bearing atmospheres. They are used for vacuum electronics, glass-to-metal seals, transmitter tubes, high-end conductors and high-purity plating anodes.

Electrolytic Tough Pitch Copper (C11000)

ETP is refined electrolytically and contains at least 99.90% copper plus a small, deliberate amount of oxygen, typically a few hundredths of a percent. The oxygen ties up impurities, which keeps conductivity at about 100% IACS or slightly higher. ETP is the workhorse for wire, cable, windings and bus bar. Its one weakness: when heated in a hydrogen-bearing atmosphere, for example during some brazing operations, the oxygen can react with hydrogen and cause embrittlement. For those applications, oxygen-free or deoxidized grades are the safer choice.

Phosphorus-Deoxidized Copper (C12200)

Adding a small amount of phosphorus removes oxygen, making the copper easy to braze and weld without embrittlement. The trade-off is conductivity: residual phosphorus lowers it to roughly 85% IACS. C12200 is the standard for plumbing tube, refrigeration and air conditioning lines, and heat exchangers.

Free-Machining Coppers (C14500 and C14700)

Pure copper is gummy to machine. Adding about half a percent of tellurium (C14500) or a smaller amount of sulfur (C14700) forms fine particles that break chips cleanly, dramatically improving machinability while keeping conductivity high. These grades are used for welding nozzles, soldering tips, and machined electrical connectors and components.

Copper for Alloying and Casting

Foundries and alloy makers often buy copper by purity and form rather than by wrought designation. Electrolytic copper at 99.9% or 99.5% minimum is the usual charge material for brass and bronze. Shot and granular forms dissolve quickly for accurate additions. When casting pure copper for conductivity, deoxidize with lithium copper or boron copper rather than phosphorus, which lowers conductivity.

Copper From Belmont

Belmont supplies 99.9% electrolytic copper in polished and unpolished shot, squares and cathode; 99.5% minimum electrolytic copper in granular and anode forms; CDA 101 OFHC copper anodes; 325 mesh granular copper powder; and copper master alloys and deoxidizers including lithium copper, boron copper and phosphor copper, all with full chemical certification.

Not sure which grade fits? Ask our team.