Product Code: 18914

360.2 Aluminum Alloy

Lead-freeAA 360.2 Elevated Temperature Strength Excellent Corrosion Resistance High Pressure Tightness Thin-Wall Die Castings
Aluminum die casting alloy (9.5% Si, 0.55% Mg) with excellent corrosion resistance, pressure tightness, and strength at elevated temperatures.
Solidus
1,035°F (557°C)
Liquidus
1,105°F (596°C)
Density
0.095 lbs/in³ (2.63 g/cm³)
Primary Elements
Al, Mg, Si
Nominal Composition
0.55% Mg, 1.0% Fe, 9.5% Si, Bal. Al
Custom request

Can't find the right composition?

Product Overview

360.2 Aluminum Alloy is an aluminum-silicon-magnesium die casting alloy with a nominal composition of 9.5% Si, 0.55% Mg, and controlled iron. The “.2” designation identifies it as an ingot grade with tighter impurity limits. It has a melting range of roughly 1,035–1,105°F (557–596°C).

Compared with the more common 380 alloy, 360 contains very little copper, which gives it better corrosion resistance, and its magnesium content provides higher strength and good retention of strength at elevated temperatures. It has excellent pressure tightness and fluidity, making it a good choice for thin-walled, intricate die castings, outdoor and marine components, and parts exposed to moisture.

Supplied as 4-18 ingot.

Available Forms

4-18 Ingot

Product Code

18914

Technical Info

Thermal Properties

Melting Point (Solidus)1,035°F (557°C)
Melting Point (Liquidus)1,105°F (596°C)

Physical Properties

Density (imperial)0.095 lbs/in³
Density (metric)2.63 g/cm³
Primary ElementsAl, Mg, Si
SpecificationAA 360.2
Lead FreeYes
Key Features
Elevated Temperature StrengthExcellent Corrosion ResistanceHigh Pressure TightnessThin-Wall Die Castings
Solubility Note

flux and degas for best pressure tightness., Melts readily in standard aluminum furnaces

Nominal Composition

  • 9.5% Si
  • 1.0% Fe
  • 0.55% Mg
  • Bal. Al
Choose 360 when corrosion resistance, pressure tightness, or strength at elevated temperatures is more important than ease of casting. 380 is easier to cast and lower cost, and remains the most common general-purpose die casting alloy. 360 has less copper, which improves corrosion resistance, but it is somewhat more difficult to cast.
Iron at about 1% reduces the tendency of molten aluminum to solder (stick) to the steel die, extending die life. It is a controlled, intentional element in die casting alloys.
Typical uses are outdoor and marine housings, lawn and garden equipment, instrument cases, covers, and thin-walled, intricate castings that need good corrosion resistance and pressure tightness.

Safety Data (SDS)

Request a Quote

Complete our Quote form, and we'll respond with options for you!