Product Code: 45815

White Brass UNS C99750

White Color White Gold Alternative Jewelry and Sculpture Grade Good Castability
White brass (58% Cu, 20% Mn, 20% Zn, 1% Al, 1% Pb) for jewelry and sculpture casting with white color resembling white gold. Ingot, bar, cubes, and shot.
Solidus
1,505°F (818°C)
Liquidus
1,550°F (843°C)
Density
0.29 lbs/in³ (8.03 g/cm³)
Primary Elements
Cu · Mn · Zn · Al · Pb
Nominal Composition
Al: 1%, Cu: 58%, Mn: 20%, Pb: 1%, Zn: 20%
Custom request

Can't find the right composition?

Product Overview

White Brass UNS C99750 is a copper-manganese-zinc alloy with a nominal composition of 58% Cu, 20% Mn, 20% Zn, 1% Al, and 1% Pb. The high manganese content produces the alloy’s distinctive white color — closely resembling white gold alloys and stainless steel — providing an economical white-metal appearance for jewelry and decorative casting applications. The aluminum addition improves strength, while the lead addition aids castability and machinability.

This alloy is specified for jewelry and sculptural pieces requiring a white metallic appearance at significantly lower cost than white gold, silver, or platinum. It is widely used for belt buckles, larger jewelry pieces, and architectural decorative hardware where white color and metal appearance are the primary aesthetic requirements. Its good fluidity and castability support production of complex geometries in investment and sand casting processes.

Forms: ingot, 2″ cut bar, 1/2″ polished cubes, and shot forms. Note that the 1% lead content requires regulatory review before specifying for food-contact, children’s products, or markets with lead-content restrictions.

Available Forms

Ingot, 2" Cut Bar, 1/2" Polished Cubes, Shot

Product Code

45815

Technical Info

Thermal Properties

Melting Point (Solidus)1,505°F (818°C)
Melting Point (Liquidus)1,550°F (843°C)

Physical Properties

Density (imperial)0.29 lbs/in³
Density (metric)8.03 g/cm³
Primary ElementsCu · Mn · Zn · Al · Pb
Lead FreeNo — contains lead
Key Features
White ColorWhite Gold AlternativeJewelry and Sculpture GradeGood Castability

Nominal Composition

  • Cu: 58%
  • Mn: 20%
  • Zn: 20%
  • Al: 1%
  • Pb: 1%

Frequently Asked Questions

Common technical inquiries regarding White Brass UNS C99750
White Brass C99750 delivers a white metallic color at a fraction of the cost of white gold or silver. Its manganese-induced white color is stable and does not yellow over time the way nickel-white golds can. While it lacks the hypoallergenic properties and precious metal purity of white gold or sterling silver, it is well suited for costume jewelry, fashion accessories, and decorative pieces where white metallic appearance is the requirement and precious metal specification is not. Rhodium electroplating over the cast piece significantly enhances the whiteness, wear resistance, and tarnish resistance of the finished product.
The 1% lead content requires regulatory review before specifying for any consumer jewelry application. California Proposition 65 requires warning labels for jewelry containing lead above 0.5%. EU REACH regulations restrict lead in consumer articles. CPSC regulations in the US restrict lead in children's jewelry to very low levels that C99750 does not meet — this alloy must not be used in products intended for children under 12. For adult costume jewelry and decorative hardware sold outside California and the EU, C99750 is commonly used, but regulatory compliance in each target market must be confirmed by the product designer before production.
As-cast White Brass produces a light grey-white metallic color that can be polished to a brighter white finish using standard metal polishing compounds and buffing wheels. Rhodium electroplating over a nickel underplate is the standard treatment for maximum white color, wear resistance, and tarnish protection — identical to the treatment used for white gold jewelry. The plated surface dramatically improves the visual quality of the base alloy. Palladium plating provides a hypoallergenic alternative to nickel underplating. Clear lacquer coating is also applied to prevent tarnishing in unplated finished pieces exposed to atmospheric conditions.

Safety Data (SDS)

Request a Quote

Complete our Quote form, and we'll respond with options for you!