Showing all 11 results
Featured products
-
Can be considered either a deoxidizer or grain refiner. Generally, for pure copper its role would be deoxidizing but in brasses it’s more of a grain refiner. Forms: - 3/4" & Down Polished Shot
- 3/4" & Down Unpolished Shot
- 40-15 Waffle
- 4-5 Oz Pcs.
Belmont Product Code 4987 Nominal Composition: - 98% Cu
- 2% B
-
-
-
Titanium is a grain refiner for Aluminum and improves mechanical properties. Forms: - 1" x 1" x 3" Sheared Pieces
Belmont Product Code 19512 Nominal Composition: - 94% Al
- 6% Ti
-
A Beryllium containing copper base master alloy which is used to introduce Beryllium into new melts or to replace Beryllium lost through oxidation in remelts. Forms: - Approx. 1" Pcs.
- 1/2" and Down Shot
- Slabs
Belmont Product Code 4962 Nominal Composition: - 96% Cu
- 4% Be
-
This alloy offers high strength, hardness, wear resistance with excellent fluidity. This alloy is ideal for investment, sand or ceramic casting and provides excellent replication of intricate detail. Forms: - 2-5 Ingot
- 2" Cut Bars
- 1" Cut Bar
- 1/2" Polished Cubes
- 1/2" x 14 Mesh Shot
Belmont Product Code 4977 Nominal Composition: - 97.2% Cu, 2.05% Be, 0.5% Co, 0.25% Si
-
-
This alloy exhibits good strength, coupled with excellent corrosion resistance and material toughness properties. This comparatively lower percentage Beryllium alloy provides thermal conductivity properties that are far superior to most Aluminum, Magnesium & Steel alloys. Forms: - 2" Cut Bars
- 2-20 Ingot
- 2-5 Ingot
Belmont Product Code 4972 Nominal Composition: - 96.8% Cu
- 0.65% Be
- 2.55% Co
-
This Beryllium Copper alloy provides good resistance to corrosion along with high strength and hardness. It is very suitable for salt water immersion applications and also offer excellent replication of intricate detail. Forms: - 2" Cut Bars
- 2-5 Ingot
Belmont Product Code 4986 Nominal Composition: - 98% Cu
- 1.7% Be
- 0.3% Co
-
Leaded red brass is typically found in plumbing applications. It is known for its reasonable cost with good machining and casting properties. The lead content ensures pressure tightness. Red brass is also used for low-cost bearing materials under low loads. Forms: - 1" x 6" x 12" Slabs
- 2-20 Ingot
- 2" Sheared Pcs.
Belmont Product Code 4852 Nominal Composition: - 85% Cu
- 5% Zn
- 5% Sn
- 5% Pb
Technical Info: - CDA #: 83600