Showing all 13 results
Featured products
-
-
Lithium has the advantage of being able to combine with both oxygen and hydrogen. Used on its own, Lithium will be more of a deoxidizer. Used in a “duplex treatment”, deoxidizing first, then Lithium can be considered a degasifier now available to be a scavenger for hydrogen and other unwanted gasses. Forms: - 1 Lb. Pcs. 1" X 1" x 4"
- 3-4 Oz. Polished Pieces
- 1" x 6" x 12" Slabs
Belmont Product Code 4981 Nominal Composition: - 98% Cu
- 2% Li
-
Excellent general use Bronze for most any Jewelry Applications. This alloy offers very high detail, easy castability, and accepts patinas very well. This alloy has a very warm bronze color. Forms: - 2-20 Ingot
- 2-5 Ingot
- 1/2" & Down Polished Shot
- 1/2" & Down Cubes
- 2" Polished Cut Bar
- Slabs
- Unpolished Shot 1/2" x 14 Mesh
Belmont Product Code 4951 Nominal Composition: - 95% Cu
- 4% Si
- 1% Mn
Technical Info: - CDA #: 87300
- Melting Range: 1550 F - 1780 F, 840 C - 971 C
- Pouring Range: 1900 F - 2250 F, 1010 C - 1235 C
- Density: 0.302 lbs/cu. in, 8.36 g/cu. cm
- Tensile Strength: 55000 lbs/sq. in.
- Yield Strength: 25000 lbs/sq in.
- Brinell Hardness: 85
-
This is a proprietary alloy especially developed for Jewelry casting. This alloy has a warm yellow color. Forms: - 1/2" Polished Cubes
- 1/2" x 14 Mesh Unpolished Shot
- 1" Cut Bar
- 2" Cut Bars
- 2-20 Ingot
- 2-5 Ingot
- Slabs
Belmont Product Code 46316 Nominal Composition: - Proprietary
Technical Info: - Melting Range: 1625 - 1650 F
- Pouring Range: 1700 - 1900 F
- Density: 0.30 lbs per cubic inch
- Specific Gravity: 8.4
- Pattern Makers Shrinkage: 3/16" per foot
- Machinability vs. free cutting brass: 80%
-
Belmont Special "H" Silicon Bronze Alloy has gained increased popularity in recent years with art and jewelry casters, primarily because of its excellent fluidity, low-drossing tendency, sharp detail reproduction, minimal finishing requirements, high ductility and suitable as a cost-effective alternative to tin bronzes. Forms: - 1/2" x 14 Mesh Polished Shot
- 1/2" X 14 Mesh Unpolished Shot
- 1/2" Polished Cubes
- 2" Cut Bars
- 2-20 Ingot
- 2-5 Ingot
Belmont Product Code 4939 Nominal Composition: - 92% Cu
- 4% Si
- 4% Zn
-
-
This alloy offers a white color that is similar to White Gold Alloys and Stainless Steel Alloys. Often used for larger pieces such as belt buckles and larger jewelry pieces. Forms: - 1/2" Polished Cubes
- 1/2" x 14 Mesh Unpolished Shot
- 2" Cut Bars
- 2-20 Ingot
- 2-5 Ingot
- Slabs
Belmont Product Code 4587 Nominal Composition: - Proprietary
-
Silicon brass a copper/zinc alloy with some tin and / or lead tossed in to improve hardness, color and machining qualities. This alloy is especially desirable for fluid moving applications. Forms: - 1/2" Polished Cubes
- 1/2" x 14 Mesh Polished Shot
- 2" Cut Polished Pcs.
- 2-20 Ingot
- 2-5 Ingot
- Slabs
Belmont Product Code 4811 Nominal Composition: - 82.5% Cu
- 4% Si
- 13.5% Zn
Technical Info: - CDA #: 87500
-
Bell metal is a hard alloy used for making bells and related instruments, such as cymbals. It is a form of bronze with a higher tin content, usually in approximately a 4:1 ratio of copper to tin (typically, 78% copper, 22% tin by mass). We offer this material in Ingot, shot, and cut pieces. Forms: - Ingot
- Irregular Shot
- 1/2" Polished Cubes
- 2" Cut Pieces
Belmont Product Code 4788 Nominal Composition: - Cu: 78%
- Sn: 22%
-
This alloy offers high strength, hardness, wear resistance with excellent fluidity. This alloy is ideal for investment, sand or ceramic casting and provides excellent replication of intricate detail. Forms: - 2-5 Ingot
- 2" Cut Bars
- 1" Cut Bar
- 1/2" Polished Cubes
- 1/2" x 14 Mesh Shot
Belmont Product Code 4977 Nominal Composition: - 97.2% Cu, 2.05% Be, 0.5% Co, 0.25% Si
-
This Copper based brazing alloy acts as a filler metal which is heated above the melting point and distributed between two or more close fitting parts by capillary action. We offer this material in differing Powder sizes as well as half inch cubes. Forms: - 1/2" Cubes
- 20-40 Mesh Granular
- 40-80 Mesh Granular
Belmont Product Code 4505 Nominal Composition: - Proprietary
-
Manganeze bronze is a high strength and a hard alloy containing manganese and zinc. It's used for highly stressed machine parts. Forms: - 1/2" Polished Cubes
- 2-20 Ingot
Belmont Product Code 4643 Nominal Composition: - 65% Cu
- 25% Zn
- 3% Mn
- 4% Al
- 3% Fe
Technical Info: - CDA #: 86200
-
99.9% Aluminum Base Alloy in the commercially pure family with good resistance to atmospheric corrosion to withstand high temperature and cost effective process. Its high hardness, excellent dielectric properties, refractoriness and good thermal properties make it the material of choice for a wide range of applications. Its main uses are electrical conductors. In the food industry, pure aluminum with 99.5% aluminum is used to manufacture films and flexible packaging. Forms: - 1/2" Oz. Cubes
- 3 Mesh and Down Nuggets
Belmont Product Code 1010 Nominal Composition: - 99.5% Al
- Bal