Showing all 5 results
Featured products
-
Belmont supplies these with full mill certification to MIL-A-1800L including chemical & physical test requirements. Available in 72" lengths or cut and threaded for Pencil Anodes. Forms: - .675" Diameter x 6' Long
- .840" Diameter x 6' Long
- .405" Diameter x 6' Long
Belmont Product Code 899Y Nominal Composition: - 99.55% Zn
-
This is a high purity Tin based Lead Free Pewter Alloy, that meets or exceeds most Lead Free requirements. We certify it to be less than 50 ppm Lead Content. It works well in Spin Cast Rubber or Silicone Molds for designs with thick cross sections or a smooth, polished finish and some malleability. Forms: - 4-5 Ingot
Belmont Product Code 798NENTB Nominal Composition: - Sn: 97-99% with Bismuth and Silver in a Proprietary formula
Technical Info: - Elongation (2" Section) : 20% - 40%
- Liquidus Temperature: 465F - 485F
- Solidus Temperature: 515F - 635F
- Density: .23 - .275 lb. / Cu. In. @ 68F
- Brinell: 18 - 25
- Tensile Strength: 5,000 psi - 8700 psi
- Solderability: Can be soldered Easily with soft solder and flux
- Finishes: Mechanical, chemical, organic, and electroplated
-
This Lead Free Pewter Alloy is high in Copper to allow it to work well in Open Face, Gravity Pour, Sand and Cast Iron Molds with maximum detail. Has good strength. Forms: - 4-5 Ingot
- 1/4" and Down shot
Belmont Product Code 791NB7 Nominal Composition: - Tin: 91-93% with Antimony and Copper.
Technical Info: - Elongation (2" Section) : 40%
- Liquidus Temperature: 563F
- Solidus Temperature: 471F
- Casting Temperature: 515F
- Brinell: 23.8
- Tensile Strength: 8600 psi
- Solderability: Can be soldered Easily with soft solder
- Finishes: Mechanical, chemical, organic, and electroplated
-
This is a Lead Free Pewter, also referred to as a Britannia Alloy that works well in Spin Cast Molds for designs, such as Fashion (Costume) Jewelry, with thin cross sections or fine filigree and maximum detail requiring less malleability and more strength. Forms: - 4-5 Ingot
Belmont Product Code 791NR8 Nominal Composition: - Sn: 91-93% with Antimony and Copper in a Proprietary formula enhanced from our standard 7921 Brittania
Technical Info: - Elongation (2" Section) : 30% - 40%
- Liquidus Temperature: 478F - 490F
- Solidus Temperature: 435F - 463F
- Brinell: 21 - 25
- Tensile Strength: 7,000 psi - 9600 psi
- Solderability: Can be soldered Easily with soft solder and flux
- Finishes: Mechanical, chemical, organic, and electroplated
-
This is our most popular Lead Free Zinc Alloy that works well in Spin Cast Vulcanized Silicone Molds for designs with thin cross sections or maximum detail. Contains Proprietary Grain Refiners for improved flow into the mold. Forms: - 4-20 lb. KZ Ingot
Belmont Product Code 892NJ1 Nominal Composition: - 91-95% Zinc in a Proprietary Formula
Technical Info: - Elongation : 8%
- Liquidus Temperature: 734F
- Pouring Temperatire: 850 F - 950 F
- Density: .24 lbs / Cu. In. @ 68F
- Tensile Strength: 52,000
- Compression Strength: 93,000 psi
- Finishes: Mechanical, chemical, organic, and electro-deposited, plastic