Call us today + 1 (833) 4-ALLOYS
minimize [-]

Contact Us

1008A – 99.9% Aluminum
2-5 Mesh Shot

1940A – 711.1 Aluminum Alloy
4-18 Ingot

Aluminum Alloys

Featuring all standard and special Al alloys—obsolete, prototype, custom customer specification, AA Specifications, small or large lots, Al-base master alloys.

Although Aluminum is the third most abundant element in the Earth’s crust (after oxygen and silicon), it is a relatively “new” metal, becoming available in commercial quantities – and at a reasonable cost – just over a century ago. This is because Aluminum is produced only by a complex process that uses huge amounts of electricity (approximately 17,000 Kwh per ton of Aluminum). Fortunately, Aluminum is easily recycled, particularly in beverage cans.

Aluminum has many useful properties, it is the lightest of the common metals, has good conductivity and corrosion resistance, and is easier to cast, forge, roll, and extrude than most metals. These properties allow Aluminum and its alloys to find applications across a broad spectrum of uses.

Aluminum is rarely used in its pure, unalloyed state. The most common metals alloyed with Aluminum are Silicon, Magnesium, Copper, Zinc, Nickel, Manganese and Tin. Among the less common are two Aluminum Alloys that contain about 1% Silver. There are over 100 recognized casting alloys, and more than 400 wrought Aluminum alloy designations. Aluminum alloys are very versatile, since stiffness, strength, corrosion resistance, machinability, and other properties can be tailored by alloy selection and heat treatments.

Category Forms:

Pigs, Ingot, Waffle, Slab, Cast Bar, Cast Pieces, Cubes, Nuggets, Shot, Powder

(Not all shapes or forms available in all grades)

Featured Product Specifications

Industry
Designation:
Aluminum
Association
Belmont
Product
Code
Form Nominal
Composition
(%)
- - - Al Cu Si Mg Ni Zn Fe Sn Ag Other
A201.1 19413A 4-18 Ingot 94 4.5 - - - - - - 0.7 Bal
A203.2 19215A 3-16 Ingot 92.35 5 - - 1.5 - - - - Bal
319.2 10319 35 lb Ingot Interlock 90.5 3.5 6 - - - - - - -
C355.2 10355.P 30 lb Ingot 93 1 5 - - - - - - Bal
A356.2 10A356P Ingot 92.6 - 7 0.4 - - - - - -
A357.2 19320A 30 lb Ingot 92.2 - 7 0.6 - - - - - Bal
C357.2 1920A 35 lb Ingot 92.22 - 7 0.6 - - - - - Bal
A380.2 18810A 4-18 Ingot 88 3.5 8.5 - - - - - - -
A390.1 1783A 4-18 Ingot 77.9 4.5 17 0.6 - - - - - -
A413.2 1883A 4-18 Ingot 88 - 12 - - - - - - -
A444.2 19325A 3-16 Ingot 93 - 7 - - - - - - -
520.2 1906A 4-18 Ingot 90 - - 10 - - - - - -
711.1 1940A 3-16 Ingot 91.7 - - - - 6.5 0.9 - - Bal
852.1 18912A 4-18 Ingot 90 2 - 0.8 1.2 - - 6 - -
A201.1
Belmont Product Code 19413A
Form 4-18 Ingot
Nominal Composition (%)Al - 94Cu - 4.5Ag - 0.7Other : Bal
A203.2
Belmont Product Code 19215A
Form 3-16 Ingot
Nominal Composition (%)Al - 92.35Cu - 5Ni - 1.5Other : Bal
319.2
Belmont Product Code 10319
Form 35 lb Ingot Interlock
Nominal Composition (%)Al - 90.5Cu - 3.5Si - 6
C355.2
Belmont Product Code 10355.P
Form 30 lb Ingot
Nominal Composition (%)Al - 93Cu - 1Si - 5Other : Bal
A356.2
Belmont Product Code 10A356P
Form Ingot
Nominal Composition (%)Al - 92.6Si - 7Mg - 0.4
A357.2
Belmont Product Code 19320A
Form 30 lb Ingot
Nominal Composition (%)Al - 92.2Si - 7Mg - 0.6Other : Bal
C357.2
Belmont Product Code 1920A
Form 35 lb Ingot
Nominal Composition (%)Al - 92.22Si - 7Mg - 0.6Other : Bal
A380.2
Belmont Product Code 18810A
Form 4-18 Ingot
Nominal Composition (%)Al - 88Cu - 3.5Si - 8.5
A390.1
Belmont Product Code 1783A
Form 4-18 Ingot
Nominal Composition (%)Al - 77.9Cu - 4.5Si - 17Mg - 0.6
A413.2
Belmont Product Code 1883A
Form 4-18 Ingot
Nominal Composition (%)Al - 88Si - 12
A444.2
Belmont Product Code 19325A
Form 3-16 Ingot
Nominal Composition (%)Al - 93Si - 7
520.2
Belmont Product Code 1906A
Form 4-18 Ingot
Nominal Composition (%)Al - 90Mg - 10
711.1
Belmont Product Code 1940A
Form 3-16 Ingot
Nominal Composition (%)Al - 91.7Zn - 6.5Fe - 0.9Other : Bal
852.1
Belmont Product Code 18912A
Form 4-18 Ingot
Nominal Composition (%)Al - 90Cu - 2Mg - 0.8Ni - 1.2Sn - 6